Main Causes Of Roof Damage in Wisconsin
Damages to a Wisconsin roof can have many causes. Some of the causes of roof
damage are connected to the type of roof you have. Whether you are trying to
protect and extend the life of an existing roof or you want to protect a new
roof, here are some of the main causes of roof damage.
1. Poor Maintenance. It is important to regularly inspect your roof for
small problems and damages and immediately make repairs. This is especially true
if your roof has little or no slope. Regular inspection and
roof
maintenance will prevent small minor damage from becoming a major problem or
leak.
2. Wind Damage. Over time any wind can loosen nails in roofing materials.
When this happens, a moderate wind can damage the roof. Strong winds and flying
debris can also damage a roof, often removing some or all of the roofing
material. The best way to avoid this potential damage is to check the roofing
and the insulation regularly to be sure it is securely attached to the roof
deck. You should also have a secure perimeter fastener.
3. Other Weather Damage. Most roofing materials can be damaged over time
by exposure to various weather conditions. If you live in an area likely to see
large snow accumulations, you need to be sure the roof is adequately supported
against the weight of the snow and properly sloped so the snow will not stay on
the roof any longer than necessary. If you live in an area prone to hailstorms,
you should know that hail can cause serious roof damage, and you should
carefully inspect your roof after every hailstorm. The sun, pollutants in the
air and other chemicals in the air or in the rain can also damage roofing
materials. Inspection and repair of minor damages can prevent big trouble.
4. Problems with Flashing. Because the purpose of flashing is to create a
water-tight boundary between roof sections, between roofing materials and other
parts of the house and between roofing materials and roof projections, problems
with flashing often cause leaks. These leaks can damage the field of the roof as
well as the interior of the house. Flashing problems usually happen because of
either design or installation errors. Some flashing problems can also result
from wind damage. Regular inspection of all types of flashing in all parts of
the roof can catch problems early and correct them before there are major leaks.
Each of these major causes of roof damage can be minimized by regular and
careful inspection by a professional
Milwaukee roofing contractor for early and minor problems. Immediate
attention to any flaws or damages with competent repairs can help you avoid
major damage to your roof and prevent the need for early and costly roof
replacement.





